Universal Front Wheel Bearing Puller(Max 4-5/8") & Rear Axle Puller(Ma

$28.75

$28.75 $0.00

Important Notice — Front Hub Puller:

Suitable for brake disc hubs with 4 or 5 bolt stud designs, as well as all non-C-lock GM axles.
The bolt pattern of the 6-lug brake rotor causes interference with adjacent bolts during installation, potentially preventing compatibility.
Can be used with forced bolts (included) or slide hammers (not included). Prevent deformation or fracture caused by excessive pulling.
The brake disc diameter is for reference only; the bolt center distance shall prevail.

Important Notice — Rear Hub Puller:

Suitable for brake disc hubs with 4, 5, or 6 bolt stud designs, as well as all non-C-lock GM axles.
Recommended for use with a slip hammer (not included) to achieve stable and powerful traction. Using high-strength forced bolts may cause deformation or breakage.
The brake disc diameter is for reference only; the bolt center distance shall prevail.

5-Lug Compatibility (Front): PCD 100–118mm (4.00–4.65"). Rear: PCD 110–144mm (4.33–5.67"). Slide hammer recommended for rear.
4-Lug Compatibility (Front): PCD 100–118mm. Rear: PCD 114–144mm.
6-Lug Compatibility: Front puller designed for 4 or 5-lug only — 6-lug bolt pattern causes interference. Rear puller compatible with PCD 114–144mm.
How to Verify Compatibility: Obtain the Mounting Bolt Hole Circle Diameter (PCD) from your vehicle manufacturer or brake rotor supplier. For 5-hole rotors, measure center-to-center distance between adjacent bolt holes.
Universal Compatibility: Front hub puller (4" to 4-5/8") fits most vehicles with independent front wheel suspension. Rear axle puller (4-5/16" to 5-2/3") designed for rear flange type axles. Fits 4, 5, or 6 bolt stud designs and all non-C-lock GM axles.
What You Get: Universal front hub puller, rear hub puller, 5/8" x18 forced bolt, 19mm socket, and fastening nut.
Simple to Operate: Use existing lug nuts to fix to wheel studs and tighten the forcing bolts. Compatible with 5/8" x18 bolt or slide hammer for a variety of vehicle models.
Pull-through Design: Fits snugly into the hub of the tapered axle and works with the tapered forcing bolt for a straight, even pull — keeping the wheel bearing in the joint and the rest of the vehicle intact.

Universal Front Wheel Bearing Puller(Max 4-5/8") & Rear Axle Puller(Max 5-2/3") Set, 2 Pack Flange Type Wheel Hub Axle Remover Tools Kit with Forcing Bolt and Socket (Thread 5/8" *18)